Name: Ontario Hunt Plus droppoint, 9715
Brand: Ontario
SKU: OKC9715
Price: 20.31 GBP
Availability: BackOrder

Fällkniven F1nz Pilot Survial Knife, Zytel sheath, outdoor knife

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Schrade Wolverine 1182520, black, fixed knife

Bestechman Ronan BMK02B OD Green G10, Satin, pocket knife

Cold Steel SRK Compact 49LCKD survival knife

productlabel

Böker Vigtig vs. Wild 121509 CPM MagnaCut, Green Canvas Micarta, survival knife

Böker Plus Vigtig 2.0 Micarta 02BO116 bushcraft knife, Dave Wenger design

Victorinox Outdoor Master Mic Small 4.2262 outdoor knife

Fallkniven S1, blank blade, leather sheath

Victorinox Venture Pro 3.090VT3.3F, Black, bushcraft knife

Ontario RAT-1 SP plain edge, 8848

Civivi Mini Elementum Fixed Blade C23010-1 Black G10, Blackwashed neck knife

Cold Steel SRK 49LCKDEBK Dark Earth, fixed knife

Schrade Wolverine Mini 1182519, black fixed knife

Condor Cavelore Knife 3935-4.3HC fixed knife 60837

Spyderco Stok Drop Point FB50GPOD OD Green G10 fixed knife, Sjoerd Stok design

Buck 285 Bantam BLW 0285BKS-B, black

KNAFS Lander, KNAFS-00065 Fast Swap Scales, Blue G10 pocket knife

Böker Plus Worldwide 2.0 01BO798 Olive Green G10, slipjoint pocket knife

Spyderco Paramilitary 2 C81GP2 pocket knife

Fox Bushman FX-609 OD outdoor knife

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Knivesandtools EDC pouch

Work Sharp Angle Set knife sharpener, WSBCHAGS

Skerper Pocket Strop STP002, stropping paddle

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fallkniven Diamond Ceramic Whetstone DC4

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Ballistol maintenance oil spray, 200 ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #OneKnifeStand, knife stand

Knivesandtools Logo Pin

Knivesandtools Sticker Set #02, Padraig Croke design

Handle/blade: rubber/stainless steel
Blade length: 10.6 cm
Weight: 164 grams

Ontario Hunt Plus droppoint, 9715

brand

colour

blade_finish

handle_material

knife_edge_type

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

strike_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Ontario Hunt Plus droppoint, 9715

Ontario Hunt Plus droppoint, 9715

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Ontario Hunt Plus droppoint, 9715

Ontario Hunt Plus droppoint, 9715

Ontario Hunt Plus droppoint, 9715

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Ontario Hunt Plus droppoint, 9715

Relevant topics