Name: J.E. Made Lanny's Clip, Brown G10, D2 slipjoint pocket knife
Brand: J.E. Made
SKU: JM-LAC-D2-BR
Price: 53.6 GBP
Availability: BackOrder

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

notforsale

not_replaced_in

Knivesandtools Knife Pouch Black, by Maxpedition

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

productlabel

Skerper Maintenance Oil Pen MA002, 10 ml

Skerper Pocket Strop STP002, stropping paddle

Knivesandtools 550 Paracord Type III Military Spec RG1167H, foliage, 100 ft (30.48 m)

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Knivesandtools 550 paracord type III, colour: charcoal grey, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Enamel Saucepan E-SP14-01, 14 cm, enamel sauce pan

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Knivesandtools #OneKnifeStand, knife stand

The **J.E. Made Lanny's Clip** is a sophisticated gentleman's knife. You can easily open the blade with the milled nail nick. The knife is not fully locked when open or when closed. This is known as a slipjoint mechanism. This means you can legally carry the Lanny's Clip with you almost anywhere. The J.E. Made slipjoint mechanism is of excellent quality, so the knife will never snap shut unexpectedly. The Lanny's Clip has a classic clip point blade.

This blade is made from D2 steel, which is a tough tool steel that stays sharp for a long time and is also easy to sharpen. Just be careful with acids, water and other types of moisture, because D2 is not completely corrosion-resistant. As long as you take care of it every now and then, D2 is a fantastic type of steel. 

The handle is made from coloured G10 and is attached to the blade with two large screws. G10 is a strong, lightweight material made from fibreglass and synthetic resin. The light texture makes this knife very comfortable to hold.

The J.E. Made Lanny's Clip comes with a full set of screws and two phosphor bronze washers. A handy Torx tool is also included, which has a T6 and a T8 bit.

J.E. Made Lanny's Clip, Brown G10, D2 slipjoint pocket knife

colour

J.E. Made Lanny's Clip, Black G10, D2 slipjoint pocket knife

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

J.E. Made Lanny's Clip, Jade G10, D2 slipjoint pocket knife

brand

legal_agecheck_key

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

pocket_blade_type

pocketknife_clip

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

J.E. Made Lanny's Clip, Brown G10, D2 slipjoint pocket knife

J.E. Made Lanny's Clip, Brown G10, D2 slipjoint pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

J.E. Made Lanny's Clip, Brown G10, D2 slipjoint pocket knife

J.E. Made Lanny's Clip, Brown G10, D2 slipjoint pocket knife

J.E. Made Lanny's Clip, Brown G10, D2 slipjoint pocket knife

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

J.E. Made Lanny's Clip, Brown G10, D2 slipjoint pocket knife

Relevant topics