Name: Benchmade 756 mPR Micro Pocket Rocket pocket knife, Sibert design
Brand: Benchmade
SKU: BE756
Availability: OutOfStock

WESN Microblade SN01-0, D2, Titanium, pocket knife

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Smith & Wesson Wood Handle Folder 1147091 pocket knife

Spyderco Urban C127PBK pocket knife

Spyderco Byrd Tern BY23GP pocket knife

Spyderco Squeak C154BK pocket knife

Benchmade 162 Bushcrafter

Benchmade Bailout 537GY pocket knife

Benchmade Grizzly Ridge 15061 pocket knife, plain edge satin blade

Böker Plus XS Droppoint 01BO533 Black slipjoint pocket knife

strike_price

Emerson CQC-7B-BT tanto, black

KA-BAR Jarosz Beartooth 3086 pocket knife, Jesse Jarosz design

Benchmade 940 Osborne

Fox FX-599 FKMD Mini Karambit

WESN Microblade Blacked Out SN01-2, D2, Titanium, pocket knife

Handle/blade: titanium/CPM 20CV 
Blade length: 4.4 cm
Weight: 100 grams

The **Benchmade 756 mPR Micro Pocket Rocket** is a short and solid pocket knife, designed by Shane Sibert. We know him from the Mini Pocket Rocket. This Micro Pocket Rocket is even smaller. The blade is only 4.4 cm and the total length only 12.2 cm.



You don't have to be a genius to know that you only have a limited amount of grip over such a knife. As such the trick is coming up with an, as ergonomic as possible, model. Sibert did this perfectly. Because the handle is slightly thicker there are many ways of wrapping your fingers around the handle.



You open this tiny knife with the flipper. The knife quickly opens and is locked with a reassuring click. The lock used is a framelock, also called a 'Monolock' by Benchmade. It is made from titanium and enhanced with a couple special features. As such the lockbar falls just below the edge of the pivot collar. This prevents overstretching. In the other direction there is also a lock which makes it impossible for the lockbar to move too far alongside the lockface of the framelock.



To make sure you don't end up with a bad working lock in the long run Benchmade combined it with a rotating stop-pin. This enables you to determine how soon or late the framelock is locked. Granted: this is a very technical story, but the enthusiasts will understand the genius of this mechanism.




The use of material is also perfect! The handle is made from titanium and the blade from CPM 20CV. This is a stainless type of steel that retains its sharpness well. All in all the Benchmade mPR is an interesting and unique pocket knife. Not only great for your collection, but also meant to be used.




Benchmade 756 mPR Micro Pocket Rocket pocket knife, Sibert design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade 756 mPR Micro Pocket Rocket pocket knife, Sibert design

Benchmade 756 mPR Micro Pocket Rocket pocket knife, Sibert design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 756 mPR Micro Pocket Rocket pocket knife, Sibert design

Benchmade 756 mPR Micro Pocket Rocket pocket knife, Sibert design

Benchmade 756 mPR Micro Pocket Rocket pocket knife, Sibert design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Benchmade 756 mPR Micro Pocket Rocket pocket knife, Sibert design

Relevant topics