Zwilling All Star 1001799, V-Edge, pull-through sharpener

notforsale

not_replaced_in

msrp_price

Zwilling Twin Cuisine kitchen knife set. This set consists of a chef's knife, a carving knife and a peeling knife.

The Twin Cuisine knives have, like many other kitchen knives, a full tang blade: the blade runs entirely through the handle. In this award-winning design, the blade runs horizontally through the black plastic handle. Which is therefore very beautifully interrupted. That handle is seamless and attached to the blade without rivets. The handle feels very comfortable. The bolster of the blade provides a good balance and protects your index finger, which logically falls behind the curve and therefore will not accidentally slip and hit the edge.  
   


The blade is made of ice-hardened Friodur steel. During the manufacturing process, this type of steel is heated up to 1000 ° C in 4 stages, and then cooled down to -70 ° C. This technology, which was perfected by Zwilling, ensures that sharpness, durability, elasticity and corrosion resistance are at the absolutely highest standard possible. The sharpening of the knife goes in 5 steps. The result is a flawless edge on the knife. The bolster does not run into the edge of the blade, which means the knife is relatively easy to sharpen on a water stone.  
  


Thanks to the seamless construction and the materials which were used, the knives of the Zwilling Pro series may be cleaned in the dishwasher. We still advise not to do this, because the dish soap and the inevitable ' clashing ' inside a dishwasher, will quicken corrosion and can cause damage to the knife.   
  

**This knife set consists of:**


* Chef's knife 30341-200, blade length: 20 cm

* Carving knife 30340-160, blade length: 16 cm

* Peeling knife 30340-100, blade length: 10 cm




Zwilling 30304-000 Twin Cuisine knife set

brand

colour

series

handedness

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

value_weight

expectedRestockDate

legal_agecheck_key

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Ich hatte bereits zwei Messer aus der Twin Cuisine-Serie und wollte meine "Kollektion" erweitern. Was soll ich sagen, ich bin auch von den drei neuen Messern absolut begeistert. Eine fantastisch scharfe Klinge und ein schöner, schwerer Griff, der perfekt in der Hand liegt. Fast unnötig zu erwähnen, dass diese Schmuckstücke bei mir nie in die Spülmaschine kommen, sondern nur von Hand gespült werden.

Een mooi zet messen, scheermes scherp. Het aanzetten op een aanzetstaal is wat lastig door het harde metaal, het harde metaal heeft wel als voordeel dat ze lang scherp blijven (bij juist gebruik).
Dit zetje is zeker een aanrader als je geen complete zet nodig hebt.

De messen zijn vlijmscherp en liggen erg fijn in de hand. De afwerking is op topniveau. De snelle service van Knives & Tools trouwens ook.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Reviews for Zwilling 30304-000 Twin Cuisine knife set

Reviews for Zwilling 30304-000 Twin Cuisine knife set

Reviews

Average rating

Reviews for Zwilling 30304-000 Twin Cuisine knife set