Wüsthof Grand Prix II Super Slicer with one-piece ergonomic handle
Handle/ Blade: Structured black nylon & X50CrMoV15 Stainless Steel
Blade length: 26 cm / 10 inch


Wusthof Grand Prix II Super Slicer with one-piece ergonomic handle.  


Thanks to the specialty serrations with rounded bulges instead of sharp points you can cut large bread and pastry almost without crumbling, the knife does not saw but cuts like a laser.  

Will also work very well on tougher & larger vegetables and meats.

Wusthof Grand Prix II Super Slicer 26 cm (10")

brand

colour

series

handedness

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

notforsale

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Prima zaagmes en zoals beloofd kruimels van b.v. stokbrood zijn zo goed als verleden verleden tijd.

Alles super,spitzen Messer,super Service!

een super functioneel mes, gebruik hem dagelijks voor groenten en brood.

Echt een geweldig mes en je kan het echt overal voor gebruiken. Heb nog niks gevonden waar hij niet doorheen komt!
Echt een goede aankoop geweest!!!

Zeer goed taartmes speciaal gekocht voor het snijden van appeltaart punten die meestal snel uitelkaar vallen. De appeltaart punten blijven goed staan zelfs na het opwarmen in de oven. Ben dan ook heel blij met dit mes goede aankoop.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Wusthof Grand Prix II Super Slicer 26 cm (10")