Name: WE Knife Yakula 2013B Red & Black Carbon fibre, utility knife 11 cm
Brand: WE Knife
SKU: WK2013B
Price: 155.95 GBP
Availability: BackOrder

Eden vertical magnetic knife strip oak, 50 x 12 cm

notforsale

not_replaced_in

Skerper Professional sharpening set 220/1000/2000/5000, dressing stone + holder

Eden vertical magnetic knife strip walnut, 50 x 12 cm

Eden magnetic knife holder zebrano wood, 50 x 6 cm

Eden cutting board P012 bamboo, 45 x 30 cm

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Basic sharpening set 180/600/1000/3000 with diamond sharpening steel, SH006

Eden Magnetic Knife Block EQB100 walnut wood

Eden Magnetic Knife Block EQB101 acacia wood

Eden cutting board P011 acacia wood, 40 x 25 cm

Eden Pankiri Japanese bread knife 27 cm

legal_agecheck_key

Eden vegetable knives, set of 3

Eden serrated tomato knives, light grey, 11 cm, set of 2

Eden Essentials kitchen scissors

Eden vegetable knives, lavender, 9 cm, set of 2

Eden 16x3 cm knife guard

The **WE Knife Yakula Red & Black Carbon fibre utility knife** is a modern kitchen knife with a bold design. The knife is lightweight and has relatively small blade. As such it is great for the smaller tasks in the kitchen such as finely chopping onions, garlic or herbs. Because of the remarkable design of this knife you can, however, also use it as a steak knife!

## WE Knife Yakula blade

The blade is made from CPM S35VN-steel. A stainless type of steel that retains its sharpness for a long time and is easy to sharpen. The knife has a flat grind that is relatively thin at the edge. As such the knife is razor-sharp.

## WE Knife Yakula handle

The remarkable handle is comprised of little pieces of carbon steel, red plastic and synthetic resin and is enhanced with a titanium bolster. The handle is nice and narrow, making the knife lightweight. As such the whole feels flexible. The stunning mosaic pin in the handle completes the whole.

WE Knife Yakula 2013B Red & Black Carbon fibre, utility knife 11 cm

brand

colour

series

handedness

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

kitchen_knife_type

value_number

value_number_of_knives

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

expectedRestockDate

msrp_price

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

WE Knife Yakula 2013B Red & Black Carbon fibre, utility knife 11 cm

WE Knife Yakula 2013B Red & Black Carbon fibre, utility knife 11 cm

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Yakula 2013B Red & Black Carbon fibre, utility knife 11 cm

WE Knife Yakula 2013B Red & Black Carbon fibre, utility knife 11 cm

WE Knife Yakula 2013B Red & Black Carbon fibre, utility knife 11 cm

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

WE Knife Yakula 2013B Red & Black Carbon fibre, utility knife 11 cm

Relevant topics