Gerber Ding-Dong Breaching Tool - 30-000790

notforsale

not_replaced_in

legal_agecheck_key

msrp_price

Condor Compact Kephart Knife 3936-2.57HC bushcraft knife 63838

strike_price

Fox Baby Core UK, Orange FX-608UKORB pocket knife, Jesper Voxnaes design

Fox Bushman FX-609 OD outdoor knife

KA-BAR Becker BK2 Companion, polyester sheath

productlabel

KA-BAR D2 Extreme Fighting Knife 1292, straight edge, Kraton handle, plastic sheath

Hultafors trekking axe Ågelsjön Mini 0.5 Premium, 841760

Ontario RAT-7 plain edge 8668 survival knife

SOG PowerPint PP1001 multi-tool

Spyderco C94PBK UK Pocket Knife

LionSteel M5 Sleipner, Green Canvas Micarta survival knife

Gerber Downrange Tomahawk 30-000715 axe, USA Made

Civivi Baby Banter C19068S-2 Black G10, Black Stonewashed pocket knife, Ben Petersen design

Fox Knives FX-140XL MB fixed knife, Markus Reichart design

Gerber Gator Machete

Marttiini Kaamos 127019 Dark Birch, Carbon, outdoor knife

Schrade 19.5" Axe, 121078, hand axe

TOPS Knives HIM-01 High Impact felling axe

KA-BAR Becker Combat Utility BK7

Cold Steel SRK SK5 49LCK fixed knife

Knivesandtools #OneKnifeStand, knife stand

Work Sharp Precision Adjust Elite WS09DX066 sharpening system

Skerper Pocket Stone diamond/ceramic sharpening stone, SO003

Skerper Basic sharpening pen with a diamond steel, SO001

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools EDC pouch

Ballistol maintenance oil, 50 ml

Knivesandtools #EveryDayCloth, micro-fibre cloth

Ballistol maintenance oil spray, 200 ml

Knivesandtools 550 paracord type III, colour: black, 100 ft (30.48 m)

Knivesandtools 550 paracord type III, colour: olive drab, 100 ft (30.48 m)

Knivesandtools Knife Patch, Padraig Croke design

Knivesandtools Skull Patch, Padraig Croke design

Handle/blade: Kraton/3Cr13
Blade length: 32,0 cm
Weight: 475 gram


SOG Kukri Machete SOGfari MC11-N machete

brand

colour

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

If you want something to scare people off with or to do some gardening and not care then its probably a good choice but it is not good quality by any measure and is cheaply made even for the price it is.

sexy chopper and excellent delivery service

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

SOG Kukri Machete SOGfari MC11-N machete

SOG Kukri Machete SOGfari MC11-N machete

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

SOG Kukri Machete SOGfari MC11-N machete

SOG Kukri Machete SOGfari MC11-N machete

SOG Kukri Machete SOGfari MC11-N machete

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

SOG Kukri Machete SOGfari MC11-N machete

Relevant topics