Name: Reate K1 Bronze CF Stonewashed / Satin Finish pocket knife
Brand: Reate
SKU: RTK1-BZ-CF-SW
Availability: OutOfStock

Handle/blade: carbon fibre and titanium/RWL34
Blade length: 9.8 cm
Weight: 140 grams


The **Reate K1** is a sleek and elegant top-quality pocket knife. The handle is milled from titanium and enhanced with carbon fibre inlays. The precision with which the inlays merge with the handle is rarely matched. To Reate Knives precision is key!


The blade is made from RWL34-steel. A stainless powdered type of steel made by the steel experts of Damask steel. The very fine hollow grind has a proper *stonewashed finish*. The smooth parts have a satin finish. A luxurious two-tone finish. The curve of the spine and the subtle jimping on top are characteristics of pure quality. You open the blade with the flipper. The ceramic detent (which normally keeps the blade inside the handle) is perfectly adjusted. Strong enough to properly use the flipper, soft enough to not strain your finger. The ceramic ball bearings around the pivot ensure that it runs smoothly. When opened the blade is locked by a solid frame lock. As you might expect from Reate the lockbar has been enhanced with a steel insert that guarantees a perfect lockup for years.


At first sight the K1 might be a little less extravagant than the other knives from the Reate range. However, this doesn’t mean that the K1 hasn’t been enhanced with Reate’s unparalleled eye for detail. For instance, the pocket clip might look a little austere. However, when you look closely you will notice how well-thought-out it actually is. It perfectly falls into the cut-out in the titanium handle and has been enhanced with a ceramic ball that will spare your pocket. The sleek finish of the lanyard hole (the hole you can use to attach your paracord lanyard to) is also impeccable.


The Reate K1 comes with a luxurious storage pouch with an extra bag with two steel rings and additional screws. As such you will already own the spare parts necessary for this knife. Very consumer-friendly!



Reate K1 Bronze CF Stonewashed / Satin Finish pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

material_sheath

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Reate K1 Bronze CF Stonewashed / Satin Finish pocket knife