Name: Medford Der Hund S35VN, Black PVD, Faced Bronze Ti, pocket knife, Greg Medford design
Brand: Medford
SKU: MF-20-HU-01
Availability: BackOrder

Handle/blade: titanium/CPM S35VN
Blade length: 6.0 cm 
Weight: 85 grams

The **Medford Der Hund** was designed by Greg Medford as the perfect companion. A compact but capable pocket knife that won't easily scare anyone. The name Der Hund comes from the name the American marines were given by the Germans during the First World War.

 You can easily open the Medford Hund with the slot in the blade with one hand. When opened the blade is blocked by the solid framelock. Because the stop pin is pressed into the blade the construction is slightly stronger than with the conventional stop pin.

 CPM S35VN is a premium, stainless type of steel. For years this has been one of the most popular types of steel on the market. It is, for stainless steel, rather tough and relatively easy to sharpen. Remarkable about the Medford knives is that the hollow grind on the blade is applied by hand. Only a rare few producers apply a hollow grind by hand.

 Each Medford knife is made by hand by talented knife makers. Individual differences therefore occur and make each knife unique. It takes approximately one year for Medford to ship their knives. Knives that are available on our website are in stock and can immediately be shipped. However, be there in time: it might take a while for the new stock to arrive!

 

Medford Der Hund S35VN, Black PVD, Faced Bronze Ti, pocket knife, Greg Medford design

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearing used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearing types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearing type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Medford Der Hund S35VN, Black PVD, Faced Bronze Ti, pocket knife, Greg Medford design