Name: KA-BAR 1117 necker
Brand: KA-BAR
SKU: KA1117
Availability: BackOrder
Rating: 8 (1 reviews)

Extrema Ratio Contact C, Desert Stonewashed 04.1000.0216/DW fixed knife

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Cold Steel SRK 49LCKDTBK Desert Tan, fixed knife

KA-BAR Jarosz Choppa 7507 survival knife

KA-BAR Jarosz Turok 7503 fixed knife

KA-BAR TDI 1480 Law Enforcement

KA-BAR Short 1256, fixed knife, leather sheath

Benchmade Mini SOCP 173BK fixed knife, Greg Thompson design

KA-BAR BK11 Becker Necker neck knife

KA-BAR Becker Remora BK13CP neck knife

Real Steel Sacra, 7711BB Black G10, Blackwashed K110 pocket knife

Böker Plus Worldwide 01BO569 slipjoint, Chad Los Banos design

Shapton Pro Stone grit 1000 medium sharpening stone, K0702

productlabel

Böker Plus Worldwide 2.0 01BO798 Olive Green G10, slipjoint pocket knife

Fällkniven F1nz Pilot Survival Knife, Zytel sheath, outdoor knife

Hultafors felling axe HY 10-0,9 SV, 840085

Hultafors trekking axe H 006 SV, 840025

KA-BAR USMC 1217 plain edge, leather, Leather sheath

Gerber Prybrid Utility Solid State 31-003746 Grey pocket knife

Handle/blade: 1095-Cro-Van
Blade length: 9.5 cm
Weight: 66 grams

KA-BAR 1117 necker

brand

blade_finish

knife_edge_type

knife_bladeshape

sharpening_angle

pocketknife_steel

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

expectedRestockDate

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Das Neck Knife hätte 5 Sterne verdient, wenn nur der Griff besser wäre. Man kann es (mit mittelgroßen Händen) nicht richtig fest greifen.
Nicht die Grifflänge, sondern die Griffbreite bzw. -form ist das Problem: zu schmal + gerade. Wenn der Griff die Form des Esee Izuala, Ka-Bar/Becker BK14 oder Tops Tibo hätte, wäre es perfekt.
Umwicklung mit Paracord - am besten doppelt - oder besser gleich mit dickerer 5mm Reepschnur, macht schon einen deutlichen Unterschied, auch wenn man das Problem damit nicht ganz beheben kann. 

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

KA-BAR 1117 necker

KA-BAR 1117 necker

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

KA-BAR 1117 necker

KA-BAR 1117 necker

KA-BAR 1117 necker

Specifications

Also popular

Reviews

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

KA-BAR 1117 necker

Relevant topics