FOX Vulpis 4-Tools FX-VP130-S4OR, N690Co, Aluminium Orange, Swiss pocket knife

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

strike_price

Fox Vulpis 4-Tools FX-VP130-S4SB, N690Co, Aluminium Sky Blue, Swiss pocket knife

Spyderco UK Penknife Salt MagnaCut C94PYL Yellow pocket knife

productlabel

Zwilling 38438-000 Pro bamboo knife block-6 pieces

Hultafors trekking axe H 006 SV, 840025

Shapton Pro Stone grit 1000 medium sharpening stone, K0702

Fiskars Pro IsoCore XXL splitting maul

Opinel No. 08 Nature Edition 002601 stainless steel, Limited Edition pocket knife, Rommy González design

Böker Plus Atropos 01BO913 VG10, Micarta pocket knife, Chuck Gedraitis design

Hultafors Premium Dvardala 0.7 Hunting & Forest Axe 841780

Opinel set pocket knives 10-piece, stainless steel

Work Sharp Precision Adjust sharpening system, WSBCHPAJ

Fällkniven F1nz Pilot Survial Knife, Zytel sheath, outdoor knife

Silky Gomboy Curve Outback Edition, 240-8

Fox Bushman FX-609 OD outdoor knife

KA-BAR TDI 1480 Law Enforcement

TSPROF K03 Pro Hunter K3P220020 sharpening system

Flytanium Spyderco Paramilitary 3 FLY-1170BK Black Titanium Backspacer

Hultafors splitting axe KLY 7-0.9 SV, 840581

Silky Pocketboy Outback Edition, 170-10

Handle/blade: G10/Niolox
Blade length: 6,1 cm
Weight: 120 gram

DPx HEAT/F Triple Black plain edge RH, right-handed

brand

colour

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

DPx HEAT/F Triple Black plain edge RH, right-handed

DPx HEAT/F Triple Black plain edge RH, right-handed

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

DPx HEAT/F Triple Black plain edge RH, right-handed

DPx HEAT/F Triple Black plain edge RH, right-handed

DPx HEAT/F Triple Black plain edge RH, right-handed

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

DPx HEAT/F Triple Black plain edge RH, right-handed

Relevant topics