Name: Buck 112 Ranger Slim Knife Select Green 0112GRS1 pocket knife
Brand: Buck
SKU: BUCK112GRS1
Availability: BackOrder

Handle/blade: FRN/420HC
Blade length: 7.3 cm
Weight: 70 grams

This **Buck 112 Slim EDC** is a slim, light-weight version of the famous Buck 112 Ranger. This Slim 112 focuses on people who carry their knife with them on a daily basis. You can easily open it with one hand, and it has been enhanced with a pocket clip to make sure it safely stays inside your jeans. 

 The contours of the Buck 112 Slim are the same as the normal 112 Ranger. However, important changes have been made in terms of use of materials and finishes. The handle, for instance, is now made from light-weight FRN. It is a strong type of plastic. A substantial saving in comparison to the heavy messing, because the Buck 112 Slim weighs only 70 grams. The blade is still made from 420HC. Simply because there is nothing wrong with it. A great type of steel, especially when it has been hardened according to the BOS recipe, like this version. Buck, however, did change the finish. The Buck 112 Slim has a stonewashed blade. This means that it was placed inside a drum filled with stones and turned until small scratches appeared on the blade. So many even that the blade seems polished. As such any traces of use don't stand out. 

 You open the blade with the double thumb stud. When opened a solid linerlock will block the blade. As a result it won't close when you don't want it to. A great aspect is that the pocket clip can be placed on both sides of the handle, and that opening and closing is easy for both left and right-handed users. As a result this knife is a friend to all. 



Buck 112 Ranger Slim Knife Select Green 0112GRS1 pocket knife

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Buck 112 Ranger Slim Knife Select Green 0112GRS1 pocket knife