Name: Böker Vollintegral 2.0 Micarta 121588 hunting knife
Brand: Böker
SKU: BO121588
Availability: BackOrder
Rating: 10 (2 reviews)

Handle/blade: micarta/440C
Blade length: 11,7 cm
Weight: 265 gram



The **Böker Vollintegral 2.0** is a large and solid fixed hunting knife. Unique about the Vollintegral is the construction of the blade and the handle. The knife is namely built on an integral frame. This means that the blade, the tang of the handle and the bolsters are forged from the same piece of 440C-steel. As such the knife is incredibly strong. When you hold it you immediately notice that it is a good knife.




The Böker Vollintegral 2.0 is an excellent choice for hunters. For years the first version of the Vollintegral was favoured amongst hunters. To make sure the 2.0 version became even better Böker used a flat grind instead of a hollow grind. As such the blade is even stronger.




The handle feels great in hand. It inspires confidence: you immediately notice that you are holding a rock-solid knife. Just before the large finger guard you can find ergonomic cut-outs for your fingers. As such you have even more control over the blade. Both when you hold the knife in your fist, and when you use it sideways to skin game.




The handle is made from micarta. A composite material made from linen and synthetic resin. Rock-solid and it feels great in hand.




You carry the Böker Vollintegral 2.0 in the included leather belt sheath.




Böker Vollintegral 2.0 Micarta 121588 hunting knife

brand

colour

zm_series

blade_finish

handle_material

knife_edge_type

material_sheath

sharpening_type

knife_bladeshape

sharpening_angle

pocketknife_steel

notforsale

knife_sheath

value_length

value_weight

value_blade_height

value_blade_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

orderNumber

reaction

reviewDate

valueForMoneyStars

meetsExpectationsStars

authorCity

Het mes is van topkwaliteit! zoals je mag verwachten van een Duitse fabrikant. Jammer dat de lederen lus om de schede aan je riem te hangen genaaid is. Door het insteken van het mes snijd je de draden snel door waardoor de lus onbruikbaar is. Dit zou met een paar RVS nagels bevestigd moeten zijn.

De NASA zou dit niet nauwkeuriger kunnen maken.
Perfect gebalanceerd en handelbaar (niet te groot en zeker niet klein).

Dit mes is om te gebruiken en niet om in een vitrine te plaatsen.

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

fixed_blade_type

knife_best_use

We like to highlight what use the manufacturer had in mind, or what we believe the knife is suited for

Best use

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Vollintegral 2.0 Micarta 121588 hunting knife