Name: Böker steak knife bog oak, 11 cm
Brand: Böker
SKU: BO03AP003
Availability: BackOrder

Steak knife, 11 cm
Blade: 4116 stainless steel
Handle: bog oak

This **Böker steak knife 03AP003** has a blade made from 4116-steel and a very special handle made from valuable bog oak. The partially serrated blade also stands out. It is the perfect table knife you don't necessarily only need to use to cut meat.

 ## Striking serrated pattern

 The pattern of the edge has a remarkable The tip has a clearly visible serration, which becomes smaller at the belly of the knife. The end of the edge, at the side of the crop, is, however, a full 'plain edge'. As such you combine the corrosion resistance of the serrated structure with the absolute sharpness of a straight edge.

 ## Ancient bog oak

 The handle, however, is what makes this steak knife even more special. It is namely made from bog oak, a type of wood that is, on average, over 5000 years old. Because the bog oak lies in the mud, without coming into contact with oxygen, it can be preserved for thousands of years without it starting to rot.

 The characteristic dark-brown colour of bog oak is the result of a chemical reaction between the tannins in the oak wood and iron in the ground. When bog oak is removed from the ground it needs to be left to carefully dry to make sure the wood won't damage. After all, as it dries it will lose about half of its weight and about a third of its size. The result is a stunning piece of very hard wood, which can definitely be called a piece of history.



Böker steak knife bog oak, 11 cm

brand

colour

blade_finish

blade_feature

kitchen_steel

handle_material

knife_edge_type

sharpening_type

sharpening_angle

delivered_as_a_set

kitchen_knife_type

value_number_of_knives

notforsale

value_weight

value_blade_height

value_blade_length

value_overall_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_handle_length

Measured from the tip of the blade to the back of the handle

Total length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

dishwasher_safe

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Way of sharpening

type_of_handle

value_total_sharpening_angle

This is the total sharpening angle, so the sharpening angles of both sides of the blade combined. For a knife with a one-sided grind this equals a single sharpening angle.

Total sharpening angle

Features & functions

For the number of knives in the knife sets we stick to the information supplied by the manufacturer. Some brands consider the block to be part of the set, others don't. 

Böker steak knife bog oak, 11 cm