Name: Böker Plus Takara CF 01BO894 pocket knife, Kansei Matsuno design
Brand: Böker
SKU: BO01BO894
Availability: BackOrder

Böker Plus Sanjo 01BO907 pocket knife, Guy Poggetti design

legal_agecheck_key

notforsale

not_replaced_in

msrp_price

Böker Plus Tenshi Brass 01BO328 pocket knife, Kansei Matsuno design

Böker Plus Tenshi Micarta 01BO327 pocket knife, Kansei Matsuno design

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Böker Plus CID cal .45 Gray 09BO086 tactical pen

Böker Plus CID cal .45 Black 09BO085 tactical pen

Böker Plus K.I.D. Cal .50, 09BO072 Black, tactical pen

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Böker Plus Tool Pen 09BO084, screwdriver

Skerper Maintenance Oil Pen MA002, 10 ml

Böker Knife Vault Small 09BO153 knife bag

Spyderco Bead BEAD5LY Flat Bead Pewter with lanyard

Knivesandtools 550 Paracord Type III Military Spec RG1164H, black, 100 ft (30.48 m)

Nano-Oil 10w maintenance oil 8cc/8ml

Boker Plus Tool kit Hex key

Boker Plus Tool kit Torx

Böker Plus Trucker Cap 09BP0009

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

productlabel

Fallkniven Diamond Ceramic Whetstone DC4

Handle/blade: carbon fibre/D2
Blade length: 7.7 cm
Weight: 95 grams

The **Böker Plus Takara** is a remarkable and fancy gentleman's knife. It was designed by Japanese designer Kansei Matsuno. His designs are incredibly popular because of their elegance. They are all remarkable. The Takara is no exception. The name Takara means 'treasure'. A nice and sympathetic name for a cool pocket knife.



You can easily open the Böker Plus Takara with the flipper or the front flipper. Both ways are easy because of the ball bearings around the pivot. When opened a liner lock will lock the blade. This lock is completely concealed behind the flipper, which also falls into the frame. As such the design is also really clean when opened.



The blade is made from D2. A simple type of steel that retains its sharpness well. Do, however, be careful around acids, moisture and salt: D2 is not completely stainless. Fortunately this shouldn't be a problem if you maintain the knife properly and use a little common sense as you use it. The jimping on the spine of the blade looks great. These subtle grip serrations offer enough grip. This combination of broad and narrow grooves looks amazing. The 3D pocket clip deserves to be mentioned. We think it is one of the most beautiful clips at the moment. A leather cord at the end of the handle finishes the Böker Takara.




Böker Plus Takara CF 01BO894 pocket knife, Kansei Matsuno design

handle_material

brand

colour

zm_series

handedness

blade_finish

opening_system

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

expectedRestockDate

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Plus Takara CF 01BO894 pocket knife, Kansei Matsuno design

Böker Plus Takara CF 01BO894 pocket knife, Kansei Matsuno design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Takara CF 01BO894 pocket knife, Kansei Matsuno design

Böker Plus Takara CF 01BO894 pocket knife, Kansei Matsuno design

Böker Plus Takara CF 01BO894 pocket knife, Kansei Matsuno design

Full description

Specifications

Also popular

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Takara CF 01BO894 pocket knife, Kansei Matsuno design

Relevant topics