Name: Böker Plus Exskelibur II Framelock Micarta 01BO367 pocket knife, Mike Skellern design
Brand: Böker
SKU: BO01BO367
Price: 84.95 GBP
Availability: InStock

Knivesandtools #EveryDayCloth, micro-fibre cloth

notforsale

not_replaced_in

Böker Knife Vault Small 09BO153 knife bag

Knivesandtools Knife Patch, Padraig Croke design

Work Sharp Guided Field Sharpener, WSGFS221

productlabel

Work Sharp Professional Precision Adjust WSBCHPAJ-PRO-I sharpening system

Skerper paddle strop Viking, rough, stropping paddle

Skerper Paddle Strop STP001, stropping paddle

Skerper Basic sharpening set 180/600/1000/3000 with ceramic sharpening steel, SH004

Skerper Maintenance Oil Pen MA002, 10 ml

Knivesandtools 550 paracord type III Military Spec , colour: Camo Green, 100 ft (30.48 m)

Böker Plus CID cal .45 Black 09BO085 tactical pen

Knivesandtools 550 paracord type III, fish and fire paracord, 100 ft (30.48 m)

KNAFS Knife Chart: A Modern Guide to Knives Poster, rolled

Nano-Oil 10w maintenance oil 8cc/8ml

Böker Plus Bit Pen 09BO128 tactical pen

Böker Plus K.I.D. Cal .50, 09BO072 Black, tactical pen

Böker Plus Trucker Cap 09BP0009

Fallkniven Diamond Ceramic Whetstone DC4

Knivesandtools Knife Pouch Black, by Maxpedition

Knivesandtools EDC pouch

The **Böker Plus Exskelibur II Framelock Micarta 01BO367** is a nice pocket knife, designed by the South African designer Mike Skellern. The Exskelibur collection has been a popular knife collection for years. With this micarta edition Böker has made the dream of many come true.

Micarta is made from canvas and synthetic resin. At first glance the micarta might look a little pale, but after using it the oils in your hands will make sure the micarta will become darker. It takes over the traces of use, making the knife all yours! 

The blade is made from D2 steel. A tough type of steel that retains its sharpness well. You do, however, have to be careful around acids and moisture. This steel is not completely stainless. So, properly clean the knife after use and occasionally add a drop of oil.

You open this Böker Exskelibur 1 with the front flipper. A opening mechanism that features the designs of Mike Stellern. A steel framelock locks the blade when opened.

Böker Plus Exskelibur II Framelock Micarta 01BO367 pocket knife, Mike Skellern design

value_blade_length

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

legal_agecheck_key

value_multitool_tools_number

knife_sheath

value_weight

value_blade_height

value_opened_length

value_blade_thickness

expectedRestockDate

msrp_price

when spending at least £90 on Böker knives (1 per order)

Free Böker Knife Quartet

designer

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

bearring_type

The is the type of bearring used between the blade and the handle, as far as we were able to determine. [Want to learn more about bearring types](/en/ct/pocket-knife-bearings-compared.htm)?

Bearring type

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Böker Plus Exskelibur II Framelock Micarta 01BO367 pocket knife, Mike Skellern design

Free Böker Knife Quartet

Böker Plus Exskelibur II Framelock Micarta 01BO367 pocket knife, Mike Skellern design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Exskelibur II Framelock Micarta 01BO367 pocket knife, Mike Skellern design

Böker Plus Exskelibur II Framelock Micarta 01BO367 pocket knife, Mike Skellern design

Free Böker Knife Quartet

Böker Plus Exskelibur II Framelock Micarta 01BO367 pocket knife, Mike Skellern design

Full description

Specifications

Specifications

General information

Dimensions & weight

Material

Features & functions

Scope of delivery

Böker Plus Exskelibur II Framelock Micarta 01BO367 pocket knife, Mike Skellern design

Relevant topics