Name: Benchmade 595S Mini Boost pocket knife, serrated edge satin blade
Brand: Benchmade
SKU: BE595S
Availability: BackOrder

Handle/blade: Versaflex/CPM S30V
Blade length: 7.8 cm
Weight: 95 grams


The **Benchmade 595 Mini Boost** is a solid pocket knife, the little brother of the Benchmade Boost. This pocket knife has been enhanced with a strong assisted opening. This means that when you open it, it is assisted by a strong spring. As a result the blade will shoot from the handle. When opened the Axis-lock will firmly keep the blade in place.


To prevent unnecessary opening the Mini Boost has been enhanced with a secondary lock on its spine. Slide the latch forward and the blade will stay in place when closed. The Benchmade Mini Boost has a blade made from CPM S30V steel: an American type of powder metallurgic steel. Sounds difficult but the only thing you have to remember is that this is a high-tech kind of steel perfect for pocket knives. Retains its sharpness well, is abrasion resistant and relatively easy to sharpen yourself. With a length of 7.8 cm this blade is perfect for everyday use.


For the handle Benchmade has chosen a relatively new type of material: Versaflex. A light-weight type of thermoplastic that feels great in hand. In terms of construction the pocket knife is completely symmetric making it the perfect tool for both left and right-handed users. The pocket clip has been placed for right-handed use but you can easily switch it by using a Torx T6 screwdriver.



Benchmade 595S Mini Boost pocket knife, serrated edge satin blade

brand

colour

zm_series

handedness

blade_finish

opening_system

handle_material

knife_edge_type

multitool_tools

sharpening_type

knife_bladeshape

pocketknife_lock

sharpening_angle

pocketknife_steel

pocketknife_onehanded

value_multitool_tools_number

notforsale

knife_sheath

value_weight

value_blade_height

value_blade_length

value_opened_length

value_blade_thickness

not_replaced_in

expectedRestockDate

legal_agecheck_key

videos

when spending at least £150 on Benchmade knives (1 per order)

Free Knivesandtools #OneKnifeStand

engravable

Personalize it! We can engrave many products. Great as a gift! [Read more about the options here](/en/pt/-order-with-engraving.htm). Looking for an engraving? Don't forget to add the product '[Order with engraving](/en/pt/-order-with-engraving.htm)' to your order. 

Can be engraved

warranty

Almost all the products we sell come with a manufacturing warranty. Want to learn more about the warranty? Read our topic: [warranty explained](/en/ct/warranty-explained.htm)

Warranty

origin

The country of origin is the country the product is produced, as far as we know. This may differ from the country where the brand itself is located.

Country of origin

article_number_site

carry_friendly

With this information we say whether a knife can be legally carried according to the knife laws in the United Kingdom. Warning! There are always exceptions and weapon-free zones where carrying knives may still not be allowed. Here you can find more information about the knife law in the [United Kingdom](/en/ct/uk-knife-laws.htm). No rights can be derived from this information.

UK Carry Friendly

General information

We always measure the blade height at the highest part of the blade.

Blade height

We always measure the blade length ourselves. This is the length of the blade from the tip to the front of the handle. This may deviate from the manufacturer's specification.

Blade length

value_blade_length_edge

The length of the cutting edge is measured from the tip to the start of the edge. This may deviate from the manufacturer's specification.

Cutting edge length

We always measure the blade thickness at the thickest part of the blade. Often just before the handle. This may deviate from the manufacturer's specification.

Blade thickness

value_closed_length

We always weigh a product as bare as possible. Knives and axes always without their sheath, lights (if possible) without their battery. For knife sets we measure the entire weight. This may deviate from the manufacturer's specifications.

Weight

Dimensions & weight

value_steel_hardness

The hardness in Rockwell C for a knife is always according to the manufacturer's specifications. When a manufacturer specifies a value of 56-58HRC, for instance, we always note the highest value, i.e. 58HRC.

Hardness

Material

This concerns the type of edge [Want to learn more about a serrated versus a plain edge](/en/ct/pocket-knives-difference-plain-edge-serrated.htm)?

Type of edge

molle_compatible

MOLLE is a mounting system that allows you to attach sheaths and other accessories to backpacks. With this specification we indicate whether a product is already MOLLE-compatible by default. [Want to learn more MOLLE](/en/ct/what-is-molle.htm)?

MOLLE-compatible

pocket_blade_type

pocketknife_clip

pocketknife_clip_position

pocketknife_clip_side

This is the type of lock used. There are many different types of locks that are used by many different brands. [Want to learn more about locks](/en/ct/locking-mechanisms-on-pocket-knives.htm)?

Lock

We measure the sharpening angle ourselves. This value is the angle per side.  So 20º means that the total angle of the edge is 40º. Please note that knives are almost always sharpened by hand, even in factories. This value is therefore only an indication of a single tool measured by us. You are always free to choose your own sharpening angle. [Learn more about sharpening angles](/en/ct/sharpening-angles-explained.htm).

Sharpening angle

In terms of grind we are talking about how the complete blade thickness extends into the edge. Want to learn more about grinds? [Read all about grinds on knives](/en/ct/knife-grinds.htm).

Benchmade 595S Mini Boost pocket knife, serrated edge satin blade

Free Knivesandtools #OneKnifeStand